Coding on Kittenblock

by KittenBot in Circuits > Gadgets

57 Views, 0 Favorites, 0 Comments

Coding on Kittenblock

kittenblock4-5ba7da0a7a9412210e49dccc5900bac3.jpg

KittenBlock is the main programming platform for FutureBoard.

Supplies

Download KittenBlock: Installing

Online Website: Link

Establishing Connection With FutureBoard

The FutureBoard needs to be connected on KittenBlock before coding.

1. Connect the FutureBoard to the PC using the provided cable.

2. Select FutureBoard from the list.

3. Click on the exclamation mark and select the FutureBoard.

The connection should be finished in a few seconds.

After a few seconds, the text 'hello world' will be displayed on the screen.

Windows 7 users may require an additional driver, please refer to the last section on this page.

4. Testing the connection

The FutureBoard should react immediately after clicking on any blocks on KittenBlock.

You may need to update the firmware if there is no reaction.

Kittenblock Coding Quick Start

1. Onboard Sensors

2. Buzzer

3. Display

4. Turtle

5. Pins

6. Neopixel

7. Microphone

8. WiFi & IoT

9. Wireless Radio

10. Robotbit

11. Basic Sensors

12. HK Observatory API

Windows 7 Drivers

For Windows 7 users, please download and install the following drivers;.

Futureboard Driver Windows 7