Code Bag ( My Dream Bag)
by Code Black Zone in Workshop > 3D Printing
92 Views, 0 Favorites, 0 Comments
Code Bag ( My Dream Bag)
Well we all have studied in school and college and we are familiar with one thing school bag . It is the thing that we must take to school or college . But there are number of problems with schoolbags so I decided to make a perfect schoolbag.
NOTE THAT THE BELOW PART IS NOT A PART OF BAG IT IS JUST A STAND
Supplies
1
The Problems With Traditional School Bags
There were a number of problems with school bags some them are -
1:) They are very slow and difficult to zip up
2:) It is difficult to keep them tidy and all stuff in them sorted
3:) There is no way to charge your device if it does not have a powerbank
4:) They are small and and have less space and sometimes it is difficult to put all the stuff in one singular bag
How I Tried to Fix Them
This is how I have tried to fix them
1:) I have solved that problem by replacing the old zipping with a magnetic system with electromagnets that are powered by the powerbank and controlled by single switch
2:) To prevent it from getting untidy and non sorted I have divided each inner room into even smaller compartements that can hold a singular notebook etc
3:) To remove the unable to charge problem I have added a large powerbank at the lower part of the bag and various types of ports at the strip side of the bag
4:) I have increased the size of the bag by around 40 % than a traditional bag pack
The New Problems That I Faced and How I Solved Them
I also found a new problem by adding this all weight that the bag has become very heavy so to prevent that I have to increase the strap size by around 10 %
How the End Product Looks Like
So here's how the final bag pack named code bag looks like