Coconut Lime Popsicles

by kelleymarie in Cooking > Dessert

15514 Views, 262 Favorites, 0 Comments

Coconut Lime Popsicles

IMG_5580.jpg
IMG_5562.jpg

With spring in the air and summer around the corner it's time to start planning a summer full of frozen popsicles and other treats. A creamy, delicious, and vegan popsicle recipe to keep you cool in this summer with a fresh zesty tang of lime. Coconut milk makes a smooth, creamy popsicle base that can take a multitude of flavor. I chose lime for this particular Instructable but the coconut milk could easily be complemented by berries, rhubarb, or chocolate.

Ingredients

IMG_5482.jpg

You'll need to gather the following:

  • 1 Can of Coconut Milk (full fat is preferable)
  • 2 Limes (for Zest and Juice)
  • 1/3 Cup of Sugar*
  • 1/4 Cup of Shredded Coconut

You'll also need the following tools:

  • A Blender
  • Popsicle Molds
  • Citrus Juicer
  • Zester

*Note: I chose to use coconut palm sugar to stick with the coconut flavor that was already the base of the popsicle. You can of course use regular white sugar as well. If you are worried about sugar levels you can also omit or change the sugar quantity as well. These popsicles will be fine, if only not as sweet, with just the fructose from the limes.

Zesting

IMG_5485.jpg
IMG_5493.jpg

Wash your limes to clean the skins thoroughly since they will be going into your popsicles. Zest the skins of both of your limes. Make sure to only zest the green outside of the lime. It should roughly equate to 1/3 to 1/2 of a cup of lime zest when you are done.

Put the zest to the side, you'll add it to your popsicle mix later.

Begin

IMG_5494.jpg

Start by adding your coconut milk to your blender.

Fillers and Sweetners

IMG_5497.jpg
IMG_5499.jpg
IMG_5503.jpg

Add your 1/3 cup of shredded coconut, all of your lime zest, and 1/4 cup of raw sugar to your blender.

Lime Juice

IMG_5504.jpg

Squeeze the juice from both of the limes you had zested. Between the two limes I managed to squeeze about a quarter cup of lime juice from both. Add that juice to your blender.

Blend

IMG_5511.jpg

Pulse the mixture with your blender until it is smooth and uniformly mixed.

Mold Away

IMG_5519.jpg
IMG_5518.jpg

Pour your popsicle mixture into your popsicle molds and place the base firmly on top.

Freeze

IMG_5522.jpg

Freeze your popsicles for a minimum of two hours or until frozen.

Enjoy!

IMG_5573.jpg
IMG_5576.jpg
IMG_5575.jpg

Let your popsicles sit out of the freezer for a minute to allow for just enough thawing so that they are easily removable. Gently rock the base of the popsicles until they release from the molds. Now they are yours to enjoy!

Get creative this summer and keep cool with refreshing, delicious popsicles.