Cloud Clock

For this project, I will show you how to make a digital clock using an Arduino chip.

1. Wires
2. 3D printing
3. Battery
4. Soldering machine
5. Arduino chip
6. Electrical tape
7. 5v battery pack

For this first step, you will be 3D printing your parts. You can design them in tinkercad. I have provided the STL files for my clock.

1. Look at the diagram
2. Get your breadboard and follow the diagram
3. After you are done with that use your soldering iron to solder and solder your wires together
4. Put black wiring tap on the parts you have just wired
5. Connect the Aurdino Chip to the computer with a cable

The PDF has the correct coding in it.

1. Take your wiring and place it inside the clock
2. Make sure the clock screen is in the hole inside the 3D-printed box

(Be gentle because the wires can disconnect, causing the clock not to work)

All you have to do now is super glue the clouds on top and you're done!