Clothespin Earbud Holder

In this Instructable I will show you how to make a pocket sized earbud holder out of clothespins.

You will need:

• Two Clothespins
• Glue (I used hot glue, some of the commenters recommended wood glue)

Optional:

• Markers or Paper (For Decorating)

Glue the clothespins together facing opposite ways. The first picture is how they should look after they are glued together.

Now this is optional, but you can use markers or paper to decorate the tops of the clothespins. In this picture I used paper that I glued to the top of the clothespins.

Lastly it's time to wrap the earbuds up. Clip the earphone end of the earbuds in one of the holes of the clothespins. Next wrap the wire around the open sides diagonally. After you run out of wire to wrap, clip the end in the other clothespin hole.

I hope you liked this Instructable! Please comment down below with your thoughts, and questions! Thanks for viewing this Instructable! :)