Claw Rings

I have loved the idea of these rings for years and have wanted a pair since I saw them.

However, the ones that I found were always insanely expensive (on the cheaper end I was finding $60AUD for both hands). Having very tiny fingers I was also worried about buying them and then them not fitting.

So I bought a pack of 30 metal filigree corners for $8.95AUD

So I thought I’d share with you all how I made them.

- Metal Filigree Corners

- Optional: something to wrap filigree corners around (eg. Pen)

- Optional: Spray Paint

Hold the filigree corner against the finger that you’re making it for. (Alternatively, you could start to shape it around something cylindrical like a pen).

Gently push the ends of the filigree corners to wrap around the sides of your finger or pen.

If you were wrapping it around another object now is when you’ll want to size it to your finger. Gently push the filigree corner ends to bend behind your finger.

I decided not to use any glue to adhere the ends so that they could stay mouldable if I needed them to be.

Repeat the previous steps for each finger.

This is what mine ended up looking like from behind

Optional: I spray-painted one set of filigree corners before shaping them for my Chesire Cat cosplay and waited for them to dry before making this set