Cigar Box Mandolin Stand
Find Wooden Cigar Box
Cut Box Horizontally for Front Ledge of Stand
Mark Sides of Box to Cut Out
Cut Out Sides
Glue Pieces of Sides or Blocks of Wood to Inside Bottom Where Cut Out
Glue Front Lid Ledge Where Locks Into Hardware
Cut Glue and Screw Small Thin Block of Wood to Back at Hinges to Stop Lid
Cut and Glue Mandolin Body Bracket to Inside Top Edge of Lid
Let Glue Cure and Sand All Edges and Glue Excess
Wipe Down Clean All Areas of Box
Spray Paint Do Artwork to Outside of Box (leave Inside Natural Color, or However Prefer)
