Chute Board

by qq2083624284 in Outside > Skateboarding

284 Views, 0 Favorites, 0 Comments

Chute Board

QQ截图20191027111431.png
QQ截图20191027201658.png
QQ截图20191027201625.png
QQ截图20191027111431.png
QQ截图20191027201758.png

Ordinary Skateboards Set

This skateboard is different from the traditional skateboard, mainly because its main panel design is different.

This skateboard in true proportion to the average skateboard: the actual value I measured is within plus or minus one centimeter. Length 81, width 20, height 4.5, thickness 1.2. The wheels are 5 in diameter, 2 in diameter, and 16 apart. (unit :cm) the following modeling USES Shift key for proportional adjustment.

QQ截图20191027085512.png

Build slide wheel body. Form a T - row clip on one side of the wheel.

QQ截图20191027085026.png
微信截图_20191027085259.png
QQ截图20191027085621.png

Use the combination of cylinder and landing platform.Combine the combined wheel, ladder platform and

cylinder to form the combination as shown in the figure

QQ截图20191027091330.png
QQ截图20191027091453.png

The connecting part between the wheel assembly and the main plate. Base it with a rectangular shape, place a cuboid on it, and then use two hollow cuboids that rotate clockwise for 30° to form the figure as shown in the figure.6. Use the inner semi-circular arc-shaped cuboid

to cut edges and corners .

QQ截图20191027092706.png

Make plane switch and combine into the following figure

QQ截图20191027093531.png
QQ截图20191027093411.png
QQ截图20191027093656.png
QQ截图20191027094256.png

Use the figure to construct support body.Combine the support body with the previous

combination shape.

QQ截图20191027100428.png
QQ截图20191027100819.png

Build the skateboard body . Use cuboid and two elliptic cylinders.

QQ截图20191027102143.png

Add QR code content as thinkeracd website.

QQ截图20191027102758.png
QQ截图20191027103732.png

Switch work plane to finish final combination.