Christmas Tree Drawing Cookies

Have you ever wondered, how would it be to eat your own drawings??? Well, well I did and right now I am eating one of my brother's drawings.

These cookies are a perfect example of a very simple but a creative recipe to do whenever and wherever.

1. Ingredients :
   1. 70 gr "Lion" Cereals
   2. 100gr Butter
   3. 60gr icing sugar
   4. 1 egg
   5. Candiessssss
   6. 1 small spoon of vanilla
   7. 100ml of milk (not show in the photo)
   8. 250gr of flour + some more for knead the mass later
2. Tools:
   1. Grinder
   2. Weighing scales
   3. Beater
   4. Hammer
   5. 3d tree printed model
   6. Bowls
   7. Strainer

My younger sibling drew a picture, that later I will base on the 3d printed model.

He drew a Christmas Tree .

Isn't it a wonderful piece of art?

The idea is that it measures 15mm of the deep.

I used Blender to design the cookie cutter, the border are more or less in 1mm width.

I would let you here the stl files to download.

I used a Geeetech E180, and PLA filament to print it.

• I used the following parameter:
  • 60m/s speed
  • Infill 80%
  • 0,2 quality
  • No support

Using the weighing scales.

Just to make it easier to mix the butter with any other ingredient we cut it in smaller pieces, resting with a normal temperature.

I strongly recommend to sieve the flour, in to order have a more fluffy cookies.

First grind the cereals and then added them to the dough and mix.

Let the dough in the bowl, cover it, and leave it in the fridge for almost 1 hour.

Meanwhile the mass is resting, we are going to crush candies.

First, we open the candies (of course you are not going to eat the plastic...), and crush

later I classified every candy by color to organize myself later.

You will see that after an hour the mass is very hard to manage, that is why we are going to spill the milk and mix.

Turn on the oven at 180º Centigrade, to make sure it is hot enough when you put the cookies later.

Now it is time to knead the dough so first of all we spread some flour in the wherever we are going to put the mass, otherwise the dough will stick to the table.

After have extended the dough with a more or less 4-3mm or more thickness. Used the 3d printed model to give our cookies a form, I even used a hammer to put bigger pression.

In case you have some difficulties to get out the mold without breaking the cookies you can help yourself with a toothpick.

It is time for candies!!!!!!

Fill the holes of the cookies with candies, make sure your cookies are stuck to the tray or paper.

Bake the cookies in the oven at 180º (that we have preheat before) for about 11minutes.

After baking they do not forget to leave them rest out of the oven, at least 5 minutes.

The cookies were DELICIOUS, they taste amazing, kind of a mix of butter cookies, LION and even milk.

I just hope you have enjoyed reading, the same I enjoyed making the cookies.