Christmas Rein Deer Pcb Design/Board

I decided to participate in the Christmas Pcb design contests :).But the thing is ,topic is Christmas and there are not much options available to christmas designs.All you can see in google is "A santa","Christmas tree with Leds" and "Sleigh" in some cases.So i decided go 'out of the box' and designed something that is never done before.Hope you all like it.This is a christmas themed 12 led Arduino nano creative board . 5-12v Dc power jack is provided for supply. Code according to your pattern :). Merry Christmas!!

Supplies:

Led (Led-TH-3mm-R) -x12

Resistor(1k) -x12

Arduino nano -x1

Dc barrel jack -x1

Route on both the sides i.e Top and Bottom layer

Set routing width more than 300 mils

The Silkscreen design is upto you.You can be as creative as possible.

Important Links for this project :

Project link : https://easyeda.com/aksharan.g/christmas

Github Repository: https://github.com/aksharanhere/Christmas_PCB

Software used: https://easyeda.com/

Gerber Files: https://github.com/aksharanhere/Christmas_PCB/blob...

Be Technically good ,at the same time be Creative :)

Thank you!!

Happy designing!