Christmas Lightbox - Files for Laser

Christmas Lightbox – files arhiv for use by the laser machine.

SIZES:

For Material’s thickness: 4mm:207x207x63mm

For Material’s thickness: 3mm:207x207x63mm

Files can be used on a K40 laser with A4 bed size.

For the backlight, I used the simplest 1m LED-stripe with battery box and remote control.

Cut out paper layers on a laser and cardboard sticks. Then sequentially glue the layers to the cardboard frames.

Cut out a wooden box and an acrylic screen. Assembly front part box.

Insert the screen into the box and paper layers.

Glue the LED-tape along the inner edge of the box.

Put a wooden partition in the middle of the lightbox. Insert a wire through the baffle hole and attach to the battery pack. Then close the lid.

If you need other file formats and sizes, you can download the files here: http://wood-toolbox.com/?product=snow-lightbox-free-digital-files