Christmas Diorama | Santa Claus

by kz creative in Living > Christmas

691 Views, 3 Favorites, 0 Comments

Christmas Diorama | Santa Claus

complete.jpg
How to Make Christmas Diorama | Santa Claus | LED Glow

How to make Christmas Diorama.

Supplies

Acrylic 3mm black and white, sticker paper print, polymer clay, super glue, 12 volt power supply, 12 volt (5050 LED strip) white for text glow, 10mm red green blue RGB LED flash rainbow voltage:3.5v x 3, glue gun, soldering iron.

vlcsnap-4428-11-11-15h40m56s716.png
vlcsnap-8730-03-10-07h15m47s537.png
vlcsnap-6131-07-06-12h55m12s868.png
vlcsnap-9801-02-25-02h41m02s255.png
vlcsnap-9353-06-14-07h50m57s394.png
vlcsnap-3257-09-25-00h34m15s598.png

Download the attached laser cutting and printing files.

Assemble the acrylic cuttings according to the instructions.

Downloads

Digital Print.ai
digital prints.pdf
Laser cutting Drawings.ai

vlcsnap-8442-08-30-07h13m44s863.png
vlcsnap-0444-07-07-09h02m43s460.png
vlcsnap-2298-03-02-16h26m54s896.png

10 mm RGB (3.5 x 3) volt LED for Rainbow Light.

5050 smd strip 12 volt for text glow.

12 volt power supply.

vlcsnap-9216-07-24-13h35m26s300.png
vlcsnap-3002-02-02-00h09m31s521.png
vlcsnap-7928-07-02-10h15m31s163.png
vlcsnap-6834-12-19-02h56m18s310.png
vlcsnap-3619-05-25-20h22m02s276.png
vlcsnap-0233-09-01-14h06m58s002.png
vlcsnap-2642-10-23-06h00m47s468.png

Modeling material is ploymer clay.

After finishing baked in oven (25 Min - 230 F).

vlcsnap-7497-05-23-09h39m46s992.png
vlcsnap-6793-11-19-14h27m30s044.png

Place it on your favorite location.

Wish you Merry Christmas and Happy New Year.