Chisel Rack
![CAM00124[1].jpg](/proxy/?url=https://content.instructables.com/FQ2/K9XZ/HZ9O6UF2/FQ2K9XZHZ9O6UF2.jpg&filename=CAM00124[1].jpg)
Here is my Chisel Holder! It's great for organizing your workshop.
Tools needed:
- Drill press
- 22mm drill bit
- 12mm drill bit
- Sander
- Saw
Materials:
- Piece of wood 52cm x 5cm x 3cm
- Two 8cm screws
Marking Holes
![CAM00119[1].jpg](/proxy/?url=https://content.instructables.com/FBE/LWFB/HZ9O6U80/FBELWFBHZ9O6U80.jpg&filename=CAM00119[1].jpg)
Mark the holes with 4cm apart
Drilling Holes
![CAM00121[1].jpg](/proxy/?url=https://content.instructables.com/F3U/QRAP/HZ9O6UD6/F3UQRAPHZ9O6UD6.jpg&filename=CAM00121[1].jpg)
![CAM00120[1].jpg](/proxy/?url=https://content.instructables.com/F7L/X546/HZ9O6U8T/F7LX546HZ9O6U8T.jpg&filename=CAM00120[1].jpg)
Drill the holes. Start with the 22mm drill, then finish with the 12mm
Cutting the Slot
![CAM00123[2].jpg](/proxy/?url=https://content.instructables.com/FFR/Z0T2/HZ9O6UEE/FFRZ0T2HZ9O6UEE.jpg&filename=CAM00123[2].jpg)
![CAM00122[1].jpg](/proxy/?url=https://content.instructables.com/F7S/X8QL/HZ9O6UDV/F7SX8QLHZ9O6UDV.jpg&filename=CAM00122[1].jpg)
Cut the vertical slots with the wood saw
Finished!
![CAM00124[1].jpg](/proxy/?url=https://content.instructables.com/FQ2/K9XZ/HZ9O6UF2/FQ2K9XZHZ9O6UF2.jpg&filename=CAM00124[1].jpg)
Hang it on the wall and put your chisels!