Chinese and English Pairing
材料
1.紙板
2.兩種以上的電阻
3.雙面膠
4.鋁箔紙
5.剪刀
6.養樂多瓶
我使用Ardublock來打程式
material
1. Cardboard
2. More than two kinds of resistance
3. Double-sided tape
4. Aluminum foil paper
5. Scissors
6. Yakult bottle
I use Ardublock to program
電路 Circuit
材料 Material
我是用紙板來當外殼,把紙板都照著我上面的長度來切割。養樂多瓶是拿來當燈罩。鋁箔紙是用來導電。
I use cardboard as the outer shell, and cut the cardboard to the length above me. The Yakult bottle is used as a lampshade.Aluminum foil paper is used to conduct electricity.
組裝步驟 Assembly Steps
我是把所有零件用黑色膠帶黏起來, 整個箱子是沒有封閉的,因為方便修理。
鋁箔紙是在紙板上穿洞穿過去。
最後再把英文單字黏上去。
I glued all the parts with black tape. The whole box is not closed because it is easy to repair.
The aluminum foil is pierced through the cardboard.
Finally, paste the English words.
組裝完成 Assembly Finish
組裝完成後,你手上有三張卡,分別是中文的藍色、紅色、黃色,然後對照上面的英文來放上卡片。
放對了就會亮,放錯了就不會亮。卡片和上面單字都可以用你的想法去改變。
After the assembly is completed, you have three cards in your hand, which are blue, red, and yellow in Chinese. Then put the cards in the English language above.
It will light up if it is placed correctly, and it will not light up if it is placed incorrectly. Both the card and the words above can be changed with your own thoughts.