Chinese Crown Knot Cross

The shape of the Chinese crown knot lends itself to this project

I used 3' of 3/16" cord.

Take the right hand strand over the left

and make a bight underneath the same cord

Take the other strand and bring it up underneath three - and down over two and through the bight

Adjust the bight to the desired shaape

Take the left hand cord and make a "S" shape

Bring the end up and down over, under, over the "S"

Then up under three

Then down over two and through the bight. Adjust the size of the loop

Take the right hand cord and make a "S"

And bring the end up and down over, under, and over the "S"

Bring the cord up under the three strands of the "S"

and down over two and through the bight. Adjust the size of the loop

Bring the right hand cord over . . .

And make a bight under the other cord

Bring that other cord up under three

and down over two and through the bight

repeat the above steps making two more crowns

There are many ways to finish.

Leave the ends alone.

Tie any two strand stopper knot