Cheating Divider

This instructable will teach you how to make a cheating divider to use during assessments in class!! 

Materials Needed: Tape measure, pencil/marker, saw, 2 wooden planks, 3d-printed holster blocks

Use tape measure to measure one of the pieces of wood  1.5ftx1.5ft.

Mark the dimensions measured in step 2 with a pencil/marker.

Use saw to cut wood based on the pencil markings.

Use tape measure to measure another piece of wood 1.75ftx1.5ft.

Mark these dimensions from step 5 with a pencil/marker.

Use saw to cut this piece of wood based on the markings from step 6.

3d-print the blocks from the attached solidworks file. (One print per file… 2 different pieces total)

We used a MakerBot Replicator 2 Desktop 3D Printer

Using 3d-printed blocks, from step 8, connect them to pieces of wood.