Cheap Wireless House Alarm System

by MICROTRONICS in Circuits > Electronics

6420 Views, 31 Favorites, 0 Comments

Cheap Wireless House Alarm System

DSC05766.JPG
Don't have any of those luxurious security systems? Lack of budget? You can have your own now without spending too much! Just look around your place and gather these materials!

Materials Needed:

DSC05779.JPG
DSC05732.JPG
131.jpg
DSC05725.JPG
DSC05739.JPG
DSC05744.JPG
DSC05745.JPG
DSC05761.JPG
 For the battery, we used battery out of coins and foil ( the one I posted a while ago) and for the reed switch we used  Mahmoud Alaa's  homemade reed switch. Thank you Mahmoud Alaa. :)

Schematic Diagram

Untitled12.jpg

Connect and Put It in the Box.

DSC05788.JPG
Solder the parts according to the schematic diagram then put it in the box. Make sure that the parts are properly secured. By the way, we just used a junction box instead of a project box because we don't have one.. You can use any box as long as the parts fit in.

Test It.

DSC05769.JPG
As you noticed, the buzzer rings continuously. But if you put a magnet, the ringing sound will stop. To use this, attach a small rope to the magnet and the other side to the door. If anyone opens the door, the alarm will ring. :)