Cheap and Easy Ipod Dock!
Here is a easy way to make a strong, hardy dock out of the box, and some more parts that came with a Ipod touch/ Iphone.
*If you happen to do this and screw up our Iphone, Ipod, Itouch, or and other I products I am not responsible.*
*If you happen to do this and screw up our Iphone, Ipod, Itouch, or and other I products I am not responsible.*
First! Gather These Materials.
No pictures.
- A very very sharp razor blade. *Careful if you cut your self or hurt anyone, don't blame me*
- JB weld *Both kinds, the blue and red, *THIS STUFF IS VERY VERY STRONG IT FIXES ENGINES! IF YOU GET IT SOMEWHERE WASH IT OFF ASAP!*
- Iphone Ipod Itouch box.
-That one white piece for the dock.
- Steady hand.
- *No stupidity is required*
- A very very sharp razor blade. *Careful if you cut your self or hurt anyone, don't blame me*
- JB weld *Both kinds, the blue and red, *THIS STUFF IS VERY VERY STRONG IT FIXES ENGINES! IF YOU GET IT SOMEWHERE WASH IT OFF ASAP!*
- Iphone Ipod Itouch box.
-That one white piece for the dock.
- Steady hand.
- *No stupidity is required*
First!
Cut out.
Next, BE VERY CAREFUL!
BE VERY CAREFUL OR THIS JUST MIGHT SCREW YOUR HOLE PROJECT UP AND YOUR END OF THE WIRE!
Let It Dry and Have Fun!
*Let it dry for about a day or two*