Cheap and Easy LED Fan

by XOIIO in Circuits > LEDs

5875 Views, 15 Favorites, 0 Comments

Cheap and Easy LED Fan

2222 015.jpg
In this instructable i will show you how to et that cool LED effect for free.

Step 1: What You Need

2222 005.jpg
2222 003.jpg
2222 002.jpg
2222 001.jpg
You will need: ( shown )
330 ohm resistor
A fan
Assorted LEDs
Wire
9 volt battery clip
Also: ( not shown )
9 volt battery
Wire strippers/ cutters
Soldering iron
Solder
Tape

Step 2: Solder

2222 007.jpg
2222 010.jpg
2222 011.jpg
Solder the 330 ohm resistor to the 9 volt battery clip. Then solder all of the positive leads from the LOED to the positive battery lead, and the negatives to the other side of the resistor. Then test too see if the LEDs work.

Step 3: Tape

2222 013.jpg
Now tape the LEDs to the fan, hook up the 9 volt and tape that also.

Step 4: Tape

2222 014.jpg
Now tape the fan to the floor.

Video

Your done! This is a video of the fan in action.

Downloads

2222 016.MOV

Final Note

XOIIO.jpg
Thank you for viewing my instructable. Please leave any comments, questions or suggestions. Please rate my instructable. Thanks.