Cheap Airsoft Red•Dot Sight

by mattbartholomai in Outside > Launchers

2529 Views, 4 Favorites, 0 Comments

Cheap Airsoft Red•Dot Sight

13, 2:34 PM.jpg

Collect You Materials

13, 2:34 PM.jpg
ruler, scissors, electrical tape, clear string, small led light, red bead, toilet paper roll (empty)

Start Cutting

13, 2:34 PM.jpg
Make about a 2 inch square with electrical tape, cut a hole in the middle.

Start Taping

13, 2:34 PM.jpg
Tape all the edges of the square on the toilet paper holder.

Keep Taping

13, 2:34 PM.jpg
Tape all the way around the top of toilet paper roll.

Poke a Hole

13, 2:34 PM.jpg
Poke a hole big enough to put the end of your light in.

Put You Light In

13, 2:34 PM.jpg
Then put your light in the hole and tape it on.

More Taping

13, 2:34 PM.jpg
Tape the toilet paper roll all the way around, make sure to tape the light too.

Poke More Holes

13, 2:34 PM.jpg
Poke holes on both sides of the toilet paper roll.(make one hole big enough to fit your bead in)

Put Your Bead On

13, 2:34 PM.jpg
Put your bead on the clear string, keep louping it around the bead so it stays.

Put Bead In

13, 2:34 PM.jpg
13, 2:34 PM.jpg
Put the string through the holes and make sure its center. Once you put it through tape the string on the outside down.

Your Done

13, 2:34 PM.jpg
Tape the scope to your gun and your done. ENJOY