Chariot Crown - Black Rock Shooter

Easy and simple. A tutorial on the crown Chariot wears from the anime Black Rock Shooter.

Template Image link: https://www.mediafire.com/?rmdz5v4qu23rv1h

Song: Black ★ Rock Shooter Animation Remixes Track 04 ~ One Day (Shinichi Osawa Remix) ~

______________________________________________________________________________

Facebook Page :- https://www.facebook.com/sabstacreations

Instructables :- https://www.instructables.com/member/Sabsta/

Twitter :- https://twitter.com/sab4555

Google+ :- https://plus.google.com/+SabrinaCavallaro/posts

DeviantArt:- http://sab455.deviantart.com/

Youtube Channel :- https://www.youtube.com/user/italianbellezza09/

eBay (If/when I decide to start selling!) :- http://www.ebay.com/usr/sabborg

You can find the link in the description of the youtube video attached.

These are the piece you'll use to trace onto the foam sheets.

Trace the template onto foam and cut out. I used yellow foam for this project but I'd recommend using Black as Chariot's crown is black so it's easier to paint later!

Organise your spikes so you've got it symmetrical - the largest spike being at the top and gradually going down to the smallest. (See photo)

Then grab some thick wire and make a circle with it. Then using smaller pieces of wire to thread into the rectangle of the spike, tie the wire to the circle (See video if I'm not making sense!)

Continue with all the spikes until you have what's in the second photo.

Then use more wire along the length of the spike to keep it standing straight. Use hot glue to attack the wire. Do this for every spike.

Then bend your spikes outwards slightly to form chariot's Crown shape.

Hot glue a piece of foam around the outside of the crown to hide the rectangles with wire and make it look neater

Then just paint it black! And it's finished :)