Charcoal Camping BBQ (lightweight, Portable, Foldable)

How to built a DIY Camping BBQ using recycled materials.

Unmounted very compact and portable

No soldering required, only a cutting tool and tolls for folding pieces of the iron sheets

Materials

- 4x steel plates (35cm X 28cm)

- grid for the bottom: to contain the charcoal

- steel wire and rods

I used 4xMetal separator of a Ikea shelves and an old BBQ grid for the bottom (to contain the charcoal)

... I know, I know... the cuts must be done better.. but this is only the first Prototype ;-)

And I need a better tool :-)

fit the 4x folded triangle inside the slots

Please note that in this prototype are not cutted+folded the 4xsupports for the cooking grill

Please note the rotating legs that will be fitted inside the 4x holes

using 4xHoles and grid rotating legs

Lets go to camping!!!