Changing Front Brakes Ford Explorer Flex Taurus Rotors Pads Clips Disk BrakesDIY
by My Two Good Hands in Workshop > Cars
313 Views, 0 Favorites, 0 Comments
Changing Front Brakes Ford Explorer Flex Taurus Rotors Pads Clips Disk BrakesDIY

Change your front Disc Brake Use all new parts. Watch video for all details.
Supplies

DEWALT Mechanics Tool Set, 1/4" & 3/8" & 1/2" Drive, SAE/Metric, 205-piece (DWMT81534)
https://amzn.to/3MGwRXsThis was easy to do yourself
“As an Amazon Associate I earn from qualifying purchases.”
Detroit Axle - 12.80" (325mm) Front Disc Rotors w/Brake Pads Kit Replacement for Ford Explorer Flex Taurus Lincoln MKS MKT - [Standard Duty Brakes] https://amzn.to/3T8Xuq2
5 Piece Set 1/2 Inch Drive Deep Impact Socket, Non-Marring Impact Lug Nut Socket with Protective Sleeves, CR-MO https://amzn.to/3fsj7Uo
WETT 4Pcs 1/2 inch Lug Nut Socket Set,Drive Wheel Protector Thin Wall Deep Impact Socket Set,6 Point,Metric,17mm,19mm,21mm,22mm,Plastic Sleeve Lug Nut https://amzn.to/3zHh9Gt
WORKPAD 3/4-Inch Composite Air Impact Wrench with Twin Hammers, Pneumatic Tools https://amzn.to/3sX8xHT
WYBENZ Impact Socket Adapter and Reducer Set /Breaker Bar Wrench Conversion Kit 1/4" -3/8" -1/2" -3/4"Adapter Set Mechanic tools with Storage Case 6Pcs https://amzn.to/3UlELZ2
BIG RED AT84007R Torin Hydraulic Low Profile Service/Floor Jack with Dual Piston Quick Lift Pump, 4 Ton (8,000 lb) Capacity,
BIG RED T46002A Torin Steel Jack Stands: Double Locking, 6 Ton (12,000 lb) Capacity, Red, 1 Pair
LEXIVON 1/2-Inch Drive Click Torque Wrench 10~150 Ft-Lb/13.6~203.5 Nm (LX-183)
HTOMT 2 in 1 Brake Bleeder Kit Hand held Vacuum Pump Test Set for Automotive with Protected Case,Adapters,One-Man Brake and Clutch Bleeding System(Red)
Olympia Tools C-Clamp (8" X 4") 38-148
Lift Car and Remove Wheel

Support with jack stand
Compress Caliper and Remove

Then remove rotor
Clean Rust From Axle If Needed

Use wire brush or a polishing wheel
New Rotor On

Put rotor on axle and add the locking bolt if it has one
Pads and Caliper On

Add Pads and rotor then Pump Brakes to firm peddle
Now add wheel and lower car now test brake before moving car