Chain Bracelet
Hi everyone! Here I have a simple bracelet made out of different colors of chain.
Supplies
- flat nose pliers
- wire cutters
- five hole clasp
- gold chain
- light gold chain
- bronze chain
- silver chain
- light silver chain
- O rings
- clasp
Cutting the Chain
- The first thing I did was find five different colors of chain that worked well together.
- Then I cut 3 chains from every color of chain that fit well around the measurement of my wrist making sure that the chains from each color were the same size.
Adding the Chains to the Five Hole Clasp
- For this part the first thing I did was put all the chains I cut of the same color together.
- Then I attached the three chains of each color to an O ring on both ends of the chains.
- I then attached the o rings with the chains to the clasp on both ends of the chain.
Adding the Clasp
- To add the clasp I added an o ring to it and then used the pliers to attach it to the five hole clasp.
- On the other side I put o rings together to get the length I wanted for the clasp to attach to.