Center Arm Lift, a Knex Ball Machine Lift

Hi knexers!

Here are the instructions for the third new lift in my knex ball machine Paradox.
The Center Arm Lift works good, and it has a low piece count (except for silver spacers).

This lift was originally invented by MechanicalCreationMaster in his ball machine Krypton (Original name: Freefall Wheel Lift)
The Center Arm Lift is based on this concept, so a lot of credit goes to him.

If you build this lift, read every image note! It will help you a lot!
If you have any problems or questions, feel free to comment or PM me.

Thanks for building or watching!

~Sandroknexmaster~

video:

If you want you can count the pieces before you start building.
Here is a list with all pieces included in this lift, named by their original color:

RODS:

Green: 24
White: 8
Blue: 49
Yellow: 14
Red: 45
Grey: 25
Long flexi: 4

Total rods: 169

CONNECTORS:

Dark-grey: 11
Light-grey: 4
Orange: 4
Red: 19
Green: 8
Yellow: 29
White: 13
Purple: 41
Blue: 5

Total connectors: 134

OTHER:

Blue spacer: 23
Silver spacer: 66
Tan clip: 9
Blue clip: 2
Y-clip: 10
Small blue gear: 2
Medium red gear: 1
Big yellow gear: 1
Motor: 1

Total other: 115

Grand Total: 418

The balls will wait on this track to enter the lift.

This part contains the motor and some gears.

The ball will roll on this track when the arm pushes it up.

These sides will keep the ball from falling of the arm.

This step contains the axle and the arms.

The ball will roll to the center on the rails.

This is the exit track. This is the last step!

Your Center Arm Lift is finished!
Always slide the switch of the motor to the left!

You can always send me a picture of your Center Arm Lift, so I can add it to this step.

Thanks for building or watching!

~Sandroknexmaster~