Catapult Instructions(School)
by LegoGood1945 in Craft > Digital Graphics
191 Views, 0 Favorites, 0 Comments
Catapult Instructions(School)
![How to Markjs](/proxy/?url=https://content.instructables.com/FCS/XD3N/KHNF0CAB/FCSXD3NKHNF0CAB.jpg&filename=How to Markjs)
This is the cataplt me and my team came up with to conserve recources
the Instructions in Words
![Screenshot 2020-11-20 at 3.18.21 PM.png](/proxy/?url=https://content.instructables.com/FSY/K3MS/KHQ9WGA3/FSYK3MSKHQ9WGA3.png&filename=Screenshot 2020-11-20 at 3.18.21 PM.png)
![Screenshot 2020-11-20 at 3.38.28 PM.png](/proxy/?url=https://content.instructables.com/F0Z/LIDS/KHQ9WKAE/F0ZLIDSKHQ9WKAE.png&filename=Screenshot 2020-11-20 at 3.38.28 PM.png)
When i say 2 feet i mean 1 so keep that in mind when cutting the wood
Take 2 2x4x6 and attach them to 2x4x2 at the corners using nuts and bolts
Secure the other 2x4x2 the same way on the opposite side as shown in drawings Secure a 2x4x5 vertically 1.4 inches away from the edge (refer to image). Drill a hole 2-3 inches above the base of the catapult and copy on the other side.take 47 ft of rope and fold it by 3 ft like a paper fan.run the rope through the hole and secure the rope using the knot in the diagram at the to of the page.
IMPORTANT INFORMATION/UPDATES
![Screenshot 2020-11-20 at 3.38.28 PM.png](/proxy/?url=https://content.instructables.com/FNF/I6VF/KHQ9WQ8R/FNFI6VFKHQ9WQ8R.png&filename=Screenshot 2020-11-20 at 3.38.28 PM.png)
![Screenshot 2020-11-20 at 3.18.21 PM.png](/proxy/?url=https://content.instructables.com/FCA/FWNM/KHQ9WQLI/FCAFWNMKHQ9WQLI.png&filename=Screenshot 2020-11-20 at 3.18.21 PM.png)
When i say 2 feet i mean 1 so keep that in mind when cutting the wood
The rope will be secured by useing the knot diagram and the throwing arm should be set in at a 80 degree angle,the breaks will be 9 cm behind the tortion rope.
2x4x6 (2 wood studs) 2x4x2 (2 wood studs) 2x4x5 (2 wood studs) ½ inch pvc 6 feet ½ inch pvc 2 feet Assorted Nuts and bolts Lag screws 1 plastic cup 47 ft of rope 3 ft of rope