Cat Treat Push Feeder

Hi , this is a cat treat push feeder , it means cat have to push the lever by one paw and then eat the treat which is fun and make them busy figuring out how on how to take out the treat.

Please vote for my instructable if you like it :)

Drill and Screwdriver

Cutter

Marker or pen

Screws

Brackets

Wood 3" , 5'' , 7''

Disposable Plastic Bowl

Plastic Bottle Cap

Secure the brackets on 7'' wood piece in the center and make a hole in the 5'' peice from the center side

Drive a bolt from brackets and the wood making it a lever

Put the lever in the plastic container and mark the area from where it can be pull and from where the plastic cup will come out,cut out the plastic by cutter make it big enough so the wood don't stuck with the sides

when lever inside drive the screws from outside the plastic bowl to secure it ,now it can easily push from outside

Secure the bracket on inside lever just for load so the lever outside is always upside

Place the plastic cap over the inside lever and secure it with a screw,put some treats in the cap.

If you like this instructable please vote this :)