Cat Feeder for Cat With Funnel Collar

Our cat needed to wear funnel collar after an operation on his tail. It was in place for a week. The collar made it difficult for him to feed because it pushed the food tray away as he tried to eat. This device lifts the food bowl up so that the collar slides underneath the bowl and the cat can reach the food.

4 x 38 mm screws or No. 8 x 1.5in

2 x 15mm screws or No. 6 x 3/4 in

Additional 150mm replaceable plant pot tray for holding food or water and placing on stand. This is placed inside the first plant pot tray which is drilled.

Dimensions are approximate. I used an old shelf for the base.

Dimensions are approximate. I used an old shelf for the base. Two 38mm screws are screwed through from underneath .the base whilst holding the support bracket in place above.

Two 38mm screws are drilled in while holding the feeder support arm centrally in place.

Drill the two 15mm screws through the drilled bowl and into the the feeder holder.