Cat Circle Container

3D design Fantastic Waasa _ Tinkercad (1).png

3D design Fantastic Waasa _ Tinkercad.png

This will be a tutorial on how to make a circle container with a subtle look like a cat.

Supplies

Tinkercad

Make a Sphere

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs.png

Drag a sphere from the right tab onto the workplane

Resize Sphere

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (1).png

Change the size of the sphere to your liking (I recommend keeping all sides equal for a perfect sphere)

Making the Hole to Hollow the Sphere

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (2).png

Copy and past the sphere and click on the pasted one, then click on the hole option and scale it down by 3 on all sides

ex: 45 x 45 x 45 -> 42 x 42 x 42

Making the Sphere Hollow

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (3).png

Drag a smaller sphere into the bigger one and make sure it fits perfectly inside without making any holes on the outside.

Once the hole is on the inside, group them together, making the inside hollow

Make Cat Ears for the Sphere

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (4).png

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (14).png

Drag a paraboloid from the right tab onto the work plane

Shape the Paraboloid however you like to make it look like a cat ear I recommend: length 41, width 14 and height 17

Once you have done that, move the ear next to the sphere, then raise and rotate it to fit into the head Edit until they look like cat ears, group everything together

Make the Top and Bottom Separate Parts

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (5).png

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (6).png

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (7).png

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (8).png

Copy and paste the already made cat sphere

Make two cube holes of equal size

Raise one of the cubes so that the bottom is equal to the top of the other (check the height of the other cube and raise it by that amount)

Group the hole to each cat sphere, make sure the two cat spheres are not grouped to each other though It should look like the last picture

Make Connections to Connect the Two Together Once Printed

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (9).png

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (10).png

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (11).png

MOHAMMED BOUDRARI - Guidelines for Creating an Instructables - Google Docs (12).png

Make a cube and make the length and width 1

Put stick on one of the bottom cat sphere’s sides

Do the same on all 4 sides

Make holes on the top side of cat by duplicating the sticks that are solid and making them holes for top side, make them holes

Group everything together, and you are finished!