Cast Brass Door Number. Lost Foam Casting

by DuralM in Workshop > Molds & Casting

1363 Views, 13 Favorites, 0 Comments

Cast Brass Door Number. Lost Foam Casting

Cast Brass Door Number. Lost foam casting

The plastic door number on my flat door was damaged, so I decided to make a new one. I will make it of brass using lost foam casting technology.

Making a Mold

Making a Cast Brass Door Number.avi_snapshot_00.07_[2017.05.24_10.51.37].jpg
Making a Cast Brass Door Number.avi_snapshot_00.22_[2017.05.24_10.52.01].jpg
Making a Cast Brass Door Number.avi_snapshot_00.35_[2017.05.24_10.52.20].jpg

Cutting a polystyrene foam pattern and making a mold

Melting and Pouring

Making a Cast Brass Door Number.avi_snapshot_01.20_[2017.05.24_10.53.09].jpg
Making a Cast Brass Door Number.avi_snapshot_01.26_[2017.05.24_10.53.18].jpg
Making a Cast Brass Door Number.avi_snapshot_01.48_[2017.05.24_10.53.43].jpg
Making a Cast Brass Door Number.avi_snapshot_02.12_[2017.05.24_10.54.11].jpg
Making a Cast Brass Door Number.avi_snapshot_02.16_[2017.05.24_10.54.23].jpg

Melting and pouring brass. After this step it's time to open a flask.

Cutting and Sanding

Making a Cast Brass Door Number.avi_snapshot_02.51_[2017.05.24_10.55.14].jpg

After I cut several pieces and sand the number, it is ready to be put on the flat door.