Bird Feeder Slinky

 Here is a neat little project i made with my  daughter  Cassidy  for mothers day.
  Its a  Bird feeder made  a slinky and  either a piece of thick wire or you  can use a  coat hanger .

My name is Cassidy  I made this bird feeder with my dad for my mom for mothers day.
  My dad found this idea from pinterest.com and made it in my dads garage.
I got to use pliers,bend wire into a circle ,spray paint.
I got to work on a  project with my dad and surprise my mom  for mothers day.

Materials,
 1~ can black Rustoleum  paint

2~  A good 4 feet of thick wire

3~ 1 pair of needle nose plyers

4~ 2  Original  metal slinkys

5~ 2 bags of shelled peanuts

The first thing you need to do is to have a qualified inspector to make sure the slinky is in proper working order ...  Cassidy   did a great job of that ...

1st  step~ is to  bend the wire into a 12'' wide  circle which you  can use a metal can to wrap it around to get the shape.
2nd step~ is to  bend a  hook at the top of the circle you just made to use as a hanger for the feeder .
3rd step~ is to bend a small hook at the other of of the wire so it will latch together to complete the circle.

4th step~ is to bend a small hook on each end of the slinky so it will latch on the wire on both ends.
5th step~ Next  is to feed the slinky around the wire and then hook both ends of the slinky to the wire at the top.

 Next is to take  the feeder outside and give  it a few light coats of black paint .

 Now just hang it up on your favorite pole and fill it with   peanuts in the shell  and enjoy .