Cardboard and Paper Telescope With 90 Degree Mirror Diagonal

by cosmicboy in Craft > Cardboard

44 Views, 0 Favorites, 0 Comments

Cardboard and Paper Telescope With 90 Degree Mirror Diagonal

IMG_8862.jpg

For the Instructables Paper and Cardboard Contest, I decided to create a cardboard telescope along with a 90-degree mirror diagonal. This project showcases how simple materials like cardboard can be transformed into functional and educational tools. The telescope is not only a fun and engaging project but also serves as an excellent introduction to the basics of astronomy and optics. The addition of a 90-degree mirror diagonal enhances the viewing experience by allowing more comfortable observations of celestial objects. Let’s dive into the steps to create your very own cardboard telescope and mirror diagonal

Supplies

2.png
IMG_8872.jpeg

Materials Needed:

  • Cardboard tubes (650 mm approx.)
  • flat piece of cardboard
  • Cardboard sheets
  • Telescope eyepiece
  • 50 mm lens
  • A small mirror (for the diagonal)
  • Hot glue gun and glue sticks

IMG_8814.jpg
IMG_8823.jpg

To make a 90-degree diagonal, cut two square pieces of cardboard based on the dimensions of your mirror. Make a hole in both square pieces of cardboard that matches the size of your eyepiece.

IMG_8825.jpg
IMG_8833.jpg

Create a 90-degree angle between the two pieces of cardboard with holes. Then, cut another square piece of cardboard of the same size and attach it between them in such a way that when light enters one hole, it reflects 90 degrees into the other hole

IMG_8828.jpg
IMG_8830.jpg
IMG_8834.jpg
IMG_8839.jpg

Now, take a paper and cut it into lengthy rectangle then roll the paper around the eyepiece to make it circular and attach it to both sides of the holes in the 90-degree diagonal.

IMG_8872.jpeg
IMG_8875.jpeg

Next take a flat piece of cardboard, roll it into a tube, and ensure it fits easily inside the main tube.

IMG_8842.jpg
IMG_8843.jpg
IMG_8857.jpg

Make a circular piece of cardboard with the same diameter as the tube and create a hole in the center that allows the eyepiece to fit easily inside. Then, stick it securely with glue.

IMG_8845.jpg
IMG_8846.jpg
IMG_8850.jpg

Cut a small front portion of the main tube, reduce its internal size by grinding or filing it, and fix the 50 mm lens in that space. Then, attach this modified portion to the main tube using glue or tape.

IMG_8862.jpg

Assemble all the components together, and your telescope is ready to use.