Cardboard and Duct Tape Dividers for School

Materials:

Scrap cardboard (cut to the write size for your binder)
Duct Tape
Hole Puncher

Hole punch your cardboard (on the left hand side)

Add Duct Tape strips, covering the holes.

Turn the cardboard over, and duct tape that side. Don't cover the holes.

Using the previous holes as a guide, use the hole punch to cut through the duct tape.

You can now cover the holes, and do the same process with the other side to cut them.

Now you have the basic divider.

If you want to add tabs:

Take a strip of duct tape and fold it halfway on itself.

Stick it to the back of your divider.

I made another divider with black duct tape, and put the tab lower than the first divider, You can make as many as you need, I only needed two.