Cardboard Rubberband Gun
![IMG_20211213_100127.jpg](/proxy/?url=https://content.instructables.com/F4S/H7A6/KX4OTWBC/F4SH7A6KX4OTWBC.jpg&filename=IMG_20211213_100127.jpg)
This project is an interesting rubber band gun, made from cardboard. Only 3 steps!
Supplies
![IMG_20211210_102405.jpg](/proxy/?url=https://content.instructables.com/FEK/JEI6/KX4OTWBO/FEKJEI6KX4OTWBO.jpg&filename=IMG_20211210_102405.jpg)
![IMG_20211213_102133.jpg](/proxy/?url=https://content.instructables.com/FSO/QS13/KX4OTX2M/FSOQS13KX4OTX2M.jpg&filename=IMG_20211213_102133.jpg)
- 1 Cardboard box (not even, just two of the flaps)
- 2 small springs (possibly from pens)
- rubber bands (small)
- Box-Cutter
- Hot Glue
Cut Into Pieces
![IMG_20211210_102211.jpg](/proxy/?url=https://content.instructables.com/FNB/83DR/KX4OTWBS/FNB83DRKX4OTWBS.jpg&filename=IMG_20211210_102211.jpg)
Cut the cardboard into two of each of the shapes shown.
All angles are 30 degrees.
Hot Glue!!
![IMG_20211210_102333.jpg](/proxy/?url=https://content.instructables.com/FZD/44PK/KX4OTY53/FZD44PKKX4OTY53.jpg&filename=IMG_20211210_102333.jpg)
Glue all the pieces together in stacks of 2 with their match (B-B, C-C, etc) DO NOT GLUE A to A
Stack as shown in the image
Glue pieces together on one of the piece As DO NOT GLUE DOWN THE C PIECE
Glue springs onto the C piece and D piece as shown
Finishing
![IMG_20211213_100127.jpg](/proxy/?url=https://content.instructables.com/FTS/092L/KX4OU0X0/FTS092LKX4OU0X0.jpg&filename=IMG_20211213_100127.jpg)
![IMG_20211213_100746.jpg](/proxy/?url=https://content.instructables.com/F6N/BSOW/KX4OU0X1/F6NBSOWKX4OU0X1.jpg&filename=IMG_20211213_100746.jpg)
Cover with the other A piece
Attach rubber bands as shown