Cardboard Robot Hand
![IMG_3784.JPG](/proxy/?url=https://content.instructables.com/F1I/WZPM/K931N5VL/F1IWZPMK931N5VL.jpg&filename=IMG_3784.JPG)
![IMG_7578.JPG](/proxy/?url=https://content.instructables.com/F9X/B0W1/K931N5VM/F9XB0W1K931N5VM.jpg&filename=IMG_7578.JPG)
This is a fun craft to make. You can even pick light items up with this hand. This is a slightly difficult item to make because the string has to be the perfect length. I hope that you try this out for yourself!
Supplies
- Cardboard
- 2 pencils (optional, you will need at least one to trace)
- String or yarn
- Paint or any other decorating materials (optional)
- Drinking straw
- Hot glue
- Scissors
Preparation
![IMG_4147.JPG](/proxy/?url=https://content.instructables.com/FIM/QRK0/K931N148/FIMQRK0K931N148.jpg&filename=IMG_4147.JPG)
![IMG_8353.JPG](/proxy/?url=https://content.instructables.com/FGU/SCHO/K931N14D/FGUSCHOK931N14D.jpg&filename=IMG_8353.JPG)
First, I gathered all of my materials and traced my hand on the cardboard. I traced my left hand because I wanted to wear the robot hand on my right.
The Hand
![IMG_0481.JPG](/proxy/?url=https://content.instructables.com/FYA/3U5V/K931N13T/FYA3U5VK931N13T.jpg&filename=IMG_0481.JPG)
Then, I cut out my hand on cardboard. I used an old moving box because the thicker the cardboard the better. I added creases where they are naturally on my hand.
Straws
![IMG_9500.JPG](/proxy/?url=https://content.instructables.com/FXF/7JNA/K931N14E/FXF7JNAK931N14E.jpg&filename=IMG_9500.JPG)
![IMG_2356.JPG](/proxy/?url=https://content.instructables.com/FB4/N0UW/K931N13Z/FB4N0UWK931N13Z.jpg&filename=IMG_2356.JPG)
![IMG_1614.JPG](/proxy/?url=https://content.instructables.com/F3K/9CHP/K931N13W/F3K9CHPK931N13W.jpg&filename=IMG_1614.JPG)
After, I put straws in between the creases to that the string would have a place to go through. I also added a handle for my hand to go through.
String
![IMG_1738.JPG](/proxy/?url=https://content.instructables.com/FXS/XALR/K931N13Y/FXSXALRK931N13Y.jpg&filename=IMG_1738.JPG)
![IMG_3215.JPG](/proxy/?url=https://content.instructables.com/F1V/7IRM/K931N143/F1V7IRMK931N143.jpg&filename=IMG_3215.JPG)
![IMG_6789.JPG](/proxy/?url=https://content.instructables.com/FBE/JEYT/K931N14C/FBEJEYTK931N14C.jpg&filename=IMG_6789.JPG)
![IMG_4734.JPG](/proxy/?url=https://content.instructables.com/FHA/IMDH/K931N14B/FHAIMDHK931N14B.jpg&filename=IMG_4734.JPG)
Next, I added strings that are long enough to make loops for my fingers.
Finger Loops
![IMG_0299.JPG](/proxy/?url=https://content.instructables.com/FHY/9TIS/K931N13M/FHY9TISK931N13M.jpg&filename=IMG_0299.JPG)
![IMG_0472.JPG](/proxy/?url=https://content.instructables.com/FD1/Q05E/K931N13R/FD1Q05EK931N13R.jpg&filename=IMG_0472.JPG)
Then, I carefully measured loops to fit my fingers. I used hot glue to glue the strings in place.
Reinforcement (optional)
![IMG_4037.JPG](/proxy/?url=https://content.instructables.com/FCV/BKQH/K931N147/FCVBKQHK931N147.jpg&filename=IMG_4037.JPG)
I hot glued a pencil to the back and a sturdy piece of plastic to the front. I used a non sharpened pencil so that there would be no risk of being poked.
Decoration (optional)
![IMG_0561.JPG](/proxy/?url=https://content.instructables.com/FXQ/58S7/K931N5UI/FXQ58S7K931N5UI.jpg&filename=IMG_0561.JPG)
![IMG_0928.JPG](/proxy/?url=https://content.instructables.com/FKG/5X1I/K931N5US/FKG5X1IK931N5US.jpg&filename=IMG_0928.JPG)
I painted the straws, handle, and reinforcements to make the robot hand look more professional. I chose spring colors to paint the straws and white to paint the handle and front reinforcement. I painted the back reinforcement to blend in with the cardboard.
Finished!
![IMG_3784.JPG](/proxy/?url=https://content.instructables.com/FFS/125A/K931N7O1/FFS125AK931N7O1.jpg&filename=IMG_3784.JPG)
I love playing with this robot hand! It can be used to pick things up or just to play with.