Cardboard Organizer for School

Have you ever needed a place for your laptop and school supplies, including water bottle?

Well, you came to the right place. In this tutorial you will learn how to make one out of cardboard and glue. You don't believe me just see for yourself.

1. Shoe box
2. Ruler
3. Exacto knife, or scissors
4. Glue gun
5. Cardboard
6. Glue stick
7. Pencil
8. Eraser

First make a diagonal/45 degree angle cut for the top side of the box. Do the same for the other side.

Second completely open the box. After that fold the top cover of the box and bring it down to the surface of the box. As shown in picture.

Third, glue the open flaps of the side of box to the diagonal cut on both sides.

Fourth fold the extra pieces on the side to the front and glue it. If your hand is not comfortable means front wall is to high ,then you might need to make a cut as needed.

Now the laptop holder is completed keep it on the side.

First get a rectangle piece of cardboard. cut it in a size of your water bottle as a example mine is 6 by 22cm.

Second cut the upper liner board as shown in the picture. After you are done that you are able to make roll it into a cylinder.

Third glue the end of the cylinder to the left or right side of your laptop holder to make your water bottle holder.

First get a square piece of cardboard. Cut out four 2x10cm rectangle pieces. Then make a 10x10cm square piece for the base.

After glue the rectangle pieces on the top of 10x10cm square piece to make the sides of a drawer.

After you are done with that make a 10 cm width and a height of 2cm hole on the empty side of your laptop holder. Insert the drawer in created space. To make a drawer handle you can use a tooth pick or roll a piece of card board and glue it in front of the drawer.

Then you are all done!