Cardboard Hand Fan

This is a hand fan made from simple 1/4 cardboard. Nothing fancy but great for a hot day.

You will need the following items to make this proyect:
2 inches or longer screw
Any size Cardboard

Tools:
Powerdrill.
Drill bit for the type of screw you will be using.
Table saw or anything to cut the cardboard.

For this project instead of doing the traditional marking for the cut, i simply set the table saw to an specific distance and did all the cuts with this measure

In this step used the screw to bring everything together.
To do this a used a power drill with a bit for my screw.
The screw work like an edge so the fan can be open and close at will.

You can ad pieces of cloth between each cardboard piece to make it look more realistic and to get more breeze.