Cardboard Hammer Prop

by kiyannadanae_ in Craft > Cardboard

841 Views, 1 Favorites, 0 Comments

Cardboard Hammer Prop

IMG_3414.jpg

Hello! My name is Kiyanna and I'm participating in the Halloween Contest (prop). One of my friends is a cosplayer and she needed a mallot for one of her cosplays, so I thought "why not?" The overall design is inspired by Csssp. I suggest you check out her channel :)

Supplies

Cardboard (Boxes are best)

Box cutter/ X-acto knife (scissors work as well)

Short pole (Ex. Broom stick)

Card stock paper

Paint (Any brand)

Fake flowers

Make the Head of the Hammer

IMG_3399.jpg

Start out by grabbing a cardboard box. It can be any size, but you don't want it to be too big for whatever you use for your handle! The size of the box you use will affect the size of the hammer.

Close Off the Open End

IMG_3400.jpg

You can either cut off the bottom flaps of the box or fold them in. (If the flaps on your box are already taped, or your box has no flaps, you can skip this step)

Create the Spikes

IMG_3407.jpg

Use your cardstock to create four half circles

Roll the Spikes

IMG_3409.jpg

Roll the spikes into cone shapes and glue the ends together.

Glue on the Spikes

IMG_3411.jpg

Use hot glue the attach two spikes to either side on the head.

Connect the Handle

IMG_3414.jpg

Finally, stick the handle through the hole and use hot glue to seal it. After this step, you're finished :)