Canvas LMS Snowflake Ornament
by tapasquini in Workshop > Laser Cutting
111 Views, 0 Favorites, 0 Comments
Canvas LMS Snowflake Ornament
![Canvas Snowflake.jpeg](/proxy/?url=https://content.instructables.com/FC4/LLM0/KI1PEXQ1/FC4LLM0KI1PEXQ1.jpg&filename=Canvas Snowflake.jpeg)
This was a little project I put together to celebrate the edTech/Makespace connection with co-workers in 2019.
The Illustrator file contains the pieces needed for laser cutting the snowflake from wood or white acrylic. The Canvas logo insets should be red acrylic.
Feel free to modify to your favorite company logo!
Downloads
Supplies
Acrylic and wood
Laser cutter
Step 1: Modify Files
![Screenshot 2021-11-22 at 3.35.24 PM.png](/proxy/?url=https://content.instructables.com/F0R/T73O/KW9976JR/F0RT73OKW9976JR.png&filename=Screenshot 2021-11-22 at 3.35.24 PM.png)
The files are quick enough to modify. If you are going to cut these in two colors, you will want to have the inset cut on one sheet and the snowflake cut on another.
Try increasing the size of the inset just slightly to account for the laser kerf.
Downloads
Step 2: Cut and Assemble
![Canvas Snowflake.jpg](/proxy/?url=https://content.instructables.com/FNP/F3RQ/KW9976LE/FNPF3RQKW9976LE.jpg&filename=Canvas Snowflake.jpg)
The cutting will work according to your own laser cutter.
Depending on your laser kerf, press fitting the two cuts together should be possible for no-mess assembly. Otherwise, a drop of glue should be more than enough.
Tie a little ribbon and share with your friends.