Canned Drink Dispenser

Love refreshing canned drinks but you have no where to put them? Look no further, just follow this easy tutorial on how to make a dispenser for your favorite canned drinks.

- Cardboard

- Hot glue gun

- Hot glue sticks

- Measuring tale or ruler

- Canned drink such as La Croix

Optional:

- Marker

- Paint

- Printer

For this project gather these supplies:

- Cardboard

- Hot glue gun

- Hot glue sticks

- Measuring tale or ruler

- Canned drink such as La Croix

Optional items:

- Marker

- Paint

- Printer

Cut out all of the cardboard pieces shown in the image (A-M). Make sure to label the pieces you cut out with their corresponding letter.

Glue side A onto side B diagonally as show in the image with hot glue. Take your time to make sure the pieces are firmly glued together because you don’t want them falling apart.

As shown in the image, glue side C diagonally to side A and parallel to side B with hot glue. Again make sure the pieces of cardboard are secure.

Glue side H to the bottom of sides A, B and C. Side H is the base of this dispenser.

Glue side D to the back of the dispenser so the it connects the highest side of A and the sides of C, B and H.

Glue side G to the top so that the 12 cm part is closer to side D. Make sure that you have folded side G before gluing.

Glue piece I to the end of side G that is closest to side D. This will serve as a handle to pull open the flap.

Glue side E to the upper part of the remaining front side as shown in the picture.

Glue side K and L together by one edge as shown in the image. Do the same with sides M and N.

Glue the joint KL piece to side F. Glue the joint MN piece to side F. Make sure to glue these pieces at an angle.

Glue F the the front of the dispenser at an angle so it is supported by the joint KL and MN pieces attached to it.

You are now finished with this project. Enjoy!