Caltrop Deployer

for the average James Bond

for this you will need;

2 pop top cans (the thicker the better, a soda can would work, but the korean iced coffee can I used would be better (don't ask why I have a korean iced coffee can))
or
1 soup can (a tomato sauce can would be best)

wire hanger
caltrops
duct tape
servo

tools;

drill
can opener
wire cutters

if you are using a pop top can follow these instructions (soda can, pop top soup can)
{

use the can opener to cut the bottom off the first can

use the can opener to cut the top off the second

keep the cut off bottom and the can without the top
}

else use these instructions (soup can, tomato sauce can)
{

cut the top off the can

keep both
}

clean out the can and lids

drill two holes in the top of the can and in the lid (about a centemeter apart)

bend the wire around a pencil

stick it through the holes

repeat

now you have a hinge

bend up the overhang on the lid so it lays flat

duct tape the servo to the can

fill with caltrops

close can and move servo

serve cold and enjoy

https://www.instructables.com/id/EXKE0HNFN0EQ6T20PV/?ALLSTEPS

do not ever use this if you make this, unless you are Q.
man i would love that job, i even made an exploding pen once.