Cable Management Using Pill Bottles

See my instructable/video to remove labels from pill bottles. After you remove the label, we are ready to start.

Needless to say, you should use larger bottles for cable management.

I just used a wood bore speed bit. 3/4 inch. You will use it to make a hole in the bottle cap.

Find about the center of cable and pull it through leaving about the length you will need on the other side.

Gently fold the cable to about the length of the pill bottle.

And then screw on the cap.

Shortening the cable, ready for travel if need be.

Messy spaghetti laying on the carpet.

No more tripping hazard.