DIY CUTTING HEAD FOR DRILLING MACHINE

Today I will give you a simple tip to convert your darling machine in to a cutting machine.

This is a DIY solution.try only with necessary safety equipments.

For this DIY you will need

(i am using Indian standards)

1) 13mm nut & bolt (M8 size)

2) Two metal washers (M10 size , 20mm dia)

3) A cutting discs 105x1x16mm

4) Two 13mm spanner

sandwich the cutting disk with two metal washers

Take the bolt and pass it through the metal washers and cutting disk

Take the nut and tight it up

Alien the metal washers,cutting disk, bolt and nut in same axis

Tight the nut with spanners or wrench

Your own DIY cutting tool is ready for action.fix it on the darling machine and start cutting

This is a DIY solution.try only with necessary safety equipments.