CPX Interactive Shoulder-bag
This is a tutorial to make an interactive bag. One that is unique and personalized to your taste! (this code is premade so I won't be including it in this specific tutorial) (you can make the code whatever you like)
Supplies
- Take out all your materials needed. A pair of fabric scissors, 1 meter by 1-meter amount of your desired fabric, a sewing machine, your cpx monitor, white and bronze thread
- Lay out your fabric and cut out a long and equal rectangle. Then fold the length in half and flip it so that the fabric is facing inwards. Put pins 1cm apart from each other along both sides. MAKE SURE TO LEAVE THE TOP UN PINNED! (You will know that it is the top as it's opposite the folded side) (the blue dots represent where you should put your pins)
- Set up your sewing machine with white threat both on the bobbin and through the needle. Sew each of the pinned sides together and tie knots at the bottom of both once done sewing so that the thread doesn’t come apart.
- Turn the fabric outwards and prepare your hand-sewing needle with bronze thread. Place the cpx monitor on any side making sure that the battery can attach to the top of the fabric. So make sure to place accurately and accordingly before sewing the thread through every other hole around the cpx.
- Once you have the cpx monitor sewn on tie off the end making sure that it’s on the inside of the bag.
- Then measure out 2 pieces of fabric that are 5cm by 16 cm and cut them out. Flip the fabric inwards and fold the width in half. Put 4 straight pins across the side and sew it with white thread on the sewing machine. Then flip the fabric through so that it’s facing outwards.
- Flip the bag inside out and sew the straps on 4 cm apart with the white thread on the sewing machine. MAKE SURE YOU DON’T SEW BOTH SIDES OF THE BAG TOGETHER! (Put the bag around the bottom of the sewing machine to prevent it from happening)
- Finally attach the battery to the top of the bag and voila. Your own innovative cpx bag, one nobody else will have.