COOKIE CAT

Hello, today we will be making a cookie cat storage box on tinkercad. The first part of the project is to make an oval at 4.84(h) 50.80 (w)37.65(l) copy that circle then make the dementines of the new circle 49.08 (l) 34.16 (w) 15.97 (h) place it in the middle of the original oval and put it at the above height of the first oval that is the main body of the cookie cat. Next is the ear first the left ear 15.12 (l) 19.32 (w) 5.15 (h) place this at the top left of the ear for the rght just copy the left then put it at the top right. Now for the top part of the ear 14.61 (l) 17.53 (w) 17 (h) copy this then put one in the middle of both of the bases of ears you've made. Next make a hole to make space for the box 45.60(l) 30.45 (w) 14.94 (h) put this in the middle part of the taller oval. Now for the hole of the ears 11.21 (l) 13.04 (w) 14.94(h) make a copy and put one on both ears put it to where it makes up with the line up of the outline of the tall oval.

computer with the browser so you can go on tinker cad, 3d printer, filament (if you actually want to print it), internet,

l (42.68) w (62.37) h (19.08) make it a hole and put it in the middle of the taller oval from earlier. l (18.37) w (15.33) h (20.39) make it a hole copy and reflect then put one in the middle of either ear. After you've done that group it all then copy it and make it l (65.88) w (72.22) and keep it at the same height. Now for the hole for the piece we will make in the future l (1.75) w (63.59) h (19.67) Put this piece in the middle of the smaller oval. (make all of the indents for the pieces you will make in the future the same height.) l (2.18) w (20.68) put in the bottom part towards the right like in the picture provided. l (1.86) w ( 23.07) put this piece at the the top towards the left like in the picture. l (15.90) w (8.18) copy this piece and put it at a angle on the ears one in each ear like the picture. Now for the indent in the eyes l (12.24) w (12.10) copy and put one on either side of the middle of the cat looking thing like the picture. Group all pieces together on either cat. (don't group the two cats together)

When the design is printed you can put the pieces in the parts where they fit l (1.03) w (63.64) h (20.43)(make all of the the parts this tall) this piece has indents in it so it can fit with the other pieces w (1.54) l (19.42) make this a hole, put the big piece in the hole you made for the middle of your cat then, line this one up with the hole you made at the top left. l (22.70) w (1.19) make this a hole then line it up with the hole you made earlier at the bottom right. Once done with this group just the holes for the middle piece and the middle piece together. now for the ear pieces l (14.52) w (8.47) copy this for the other are and turn it to match the indents you made earlier. Now for the pieces in the middle first the bottom piece l (1.16) w (23.24) now for the top piece l (1.09) w (19.91).

When you are done you can resize it to the wished porportains all together if you would like to print them bigger or smaller. You can also put all the pieces together in tinkercad just for fun.