CNC Miil Box

A small guide to creating a stand for your cutters)

I apologize for the error, english is not my native language ...

Need:

- Plywood 4mm - 960*650mm

- Glue for wood D3

My first instruments were stored in a carton box.

When they became a lot I began to spend a lot of time searching for mills.

I've been watching the network for the required I box.
And, in the end, I decided to do it himself.

I Created in CorelDraw drawings, send them to my laser cutter and give hill parts)

We begin to glue the box.
Do not forget to glue stand for collet nuts, otherwise they will fall into the holes.

You should get almost a complete product ...

Again, the laser-glue-drying ...

END!)