CARDBOARD/DUCT TAPE PARTS TRAYS
by DoDo729 in Workshop > Organizing
1984 Views, 26 Favorites, 0 Comments
CARDBOARD/DUCT TAPE PARTS TRAYS
As a bicycle mechanic, when I strip a bike down I need something to hold all the parts that have been removed. There are times when I will have two or three bikes stripped down. So I decided to make some parts trays using some sturdy cardboard and duct tape. Extremely simple to build and they work great. The duct tape allows grease and oil to be wiped off with ease.
MATERIALS:
Cardboard. Duct tape and electrical tape
INSTRUCTIONS: Cut your duct tape in lengths to line the inside and outside of the cardboard container. I used electrical tape to cover the edge that wasn't covered by the duct tape. Smooth out all the tape and you are done. Make one or many depending on your requirements. See the photos.
MATERIALS:
Cardboard. Duct tape and electrical tape
INSTRUCTIONS: Cut your duct tape in lengths to line the inside and outside of the cardboard container. I used electrical tape to cover the edge that wasn't covered by the duct tape. Smooth out all the tape and you are done. Make one or many depending on your requirements. See the photos.