C4 Remote Prop

Hi guys n gals .
today i was thinking about a remote for the c4 that i made and how should it look so i came up with this thing you are looking at . it looks more cartoonic hope you enjoy it .

The items n materials you need. (you can find most of it in your home)
1-cardboard sheet
2-cutter
3-foam board (1mm) & (3mm)
4-straw (7cm)
5-A4 sheet
6-foam glue
7-paint (black / grey or silver / yellow / red white)

note:please see the pictures with the texts to understand better
lets get started.

for this section you need to make the general body of the remote .

• size
  main surface : 7 x 4 (cm)
  Length : 1.5 x 7 (Cm)
  Width : 4 x 1 (cm)
  
  

  after you cut out the peaces on card board you should glue them together
  Note : Look at the pictures for a better reference on how to make it thinner .
  
  sorry i forget to take a picture from the raw box i created it looks like one of the c4 blocks but smaller .

you should make a hole in your top left part of your width and put your straw into the box about 3mm.
after that make a 1.5 x 1 (cm) card board and make the same hole with the same diameter and push it from the top of the straw and attach it to the top width glue .

NOTE : YOU SHOULD FILL THE STRAW WITH PAPPER OR SHOPPING RECEIPTS TO MAKE IT HARD INSIDE.

• you should cute 3 rectangle foams (3mm) with the sizes of

1. 2 x 1 (cm) (small one)
2. 2.5 x 1 (cm) (medium one)
3. 3 x 1 (cm) (large one)
4. glue them like picture above

• after that you should make a screen ( i really don't know why i made it :| ! just for fun :D )

1. cut out a 1.5 x 4 (cm) of your 1mm foam
2. and cut out a a4 paper with the same scale
3. glue them together and attach the to the middle top part of your main surface .

• and for the red button

1. cut out 1 x 3 (cm) cardboard
2. glue it to the right top side of your lenght part like picture above

• Start painting like the picture above and have fun
  i used poster colors .

♦♦♦congratulations you have finished your c4 remote prop♦♦♦
sorry for bad English and bad explaining i tried my best to explain the process . if you have any ideas or question comment them down below . thanks for your time ♥ hope to teach you the thing you wanted .

P.N : i don't take any responsibilities for any miss use or problems

1. the firsts picture is the plan i designed for making this thing its a little vague but you can sort things out -_^
2. and the second picture is a future reference that i might create a bag or something like that to put the c4 and the remote in it (Half-life 1 c4 charge)