Buzz Lightyear Laser
by wentworthm in Craft > Costumes & Cosplay
1778 Views, 1 Favorites, 0 Comments
Buzz Lightyear Laser
![Buzz Lightyear Laser](/proxy/?url=https://content.instructables.com/FPY/77VH/JOEW1C0I/FPY77VHJOEW1C0I.jpg&filename=Buzz Lightyear Laser)
![Buzz Lightyear Communicator](/proxy/?url=https://content.instructables.com/F4L/DYQO/JOEW1BZG/F4LDYQOJOEW1BZG.jpg&filename=Buzz Lightyear Communicator)
I built these two items to go along with the Buzz Lightyear Jetpack that I made as my son's halloween costume. These two accessories were mostly 3D printed on my Prusa i3 Mk3 printer. Let me know what you think.
Design and Build
![IMG_7145.JPG](/proxy/?url=https://content.instructables.com/F38/3A1T/JOEW1BR6/F383A1TJOEW1BR6.jpg&filename=IMG_7145.JPG)
I designed these in TinkerCAD. The designs can be found here (https://www.thingiverse.com/thing:3215029). It was a very simple setup. The wiring was standard 22 gauge wire, a standard LED, pushbutton (any will do) and a 3.7v lipo battery. The battery was salvaged from an old mini drone that I had. Please watch the videos and let me know what you think. To hold the communicator's cover I used zip ties and to seal up the laser and hold the LED cover I used simple super glue.