Butter Stamp
![Screen Shot 2021-11-15 at 9.21.48 AM.png](/proxy/?url=https://content.instructables.com/FI9/QFZC/KW0OIBBF/FI9QFZCKW0OIBBF.png&filename=Screen Shot 2021-11-15 at 9.21.48 AM.png)
Hello, for this instructable I am going to teach you how to make a butter stamp. Before we start, set the snap grid to 1.0 mm.
Supplies
Computer
3d printer
Place a Box
![Screen Shot 2021-11-08 at 9.27.33 AM.png](/proxy/?url=https://content.instructables.com/FQL/13AL/KVWE5APY/FQL13ALKVWE5APY.png&filename=Screen Shot 2021-11-08 at 9.27.33 AM.png)
From the shape selection, grab a box and bring it to the plane. We will call this shape S1.
CTW of S1
![Screen Shot 2021-11-08 at 9.28.44 AM.png](/proxy/?url=https://content.instructables.com/FBL/WZMG/KVWE5AQ1/FBLWZMGKVWE5AQ1.png&filename=Screen Shot 2021-11-08 at 9.28.44 AM.png)
Change the width of S1 to 35 mm.
CTL of S1
![Screen Shot 2021-11-08 at 9.29.05 AM.png](/proxy/?url=https://content.instructables.com/FBI/OKS1/KVWE5AQ2/FBIOKS1KVWE5AQ2.png&filename=Screen Shot 2021-11-08 at 9.29.05 AM.png)
Change the length of S1 to 35 mm.
CTH of S1
![Screen Shot 2021-11-08 at 9.29.37 AM.png](/proxy/?url=https://content.instructables.com/FYT/TL5V/KVWE5AQ3/FYTTL5VKVWE5AQ3.png&filename=Screen Shot 2021-11-08 at 9.29.37 AM.png)
Change the height of S1 to 10 mm.
Add a Box
![Screen Shot 2021-11-08 at 9.27.33 AM.png](/proxy/?url=https://content.instructables.com/FQL/13AL/KVWE5APY/FQL13ALKVWE5APY.png&filename=Screen Shot 2021-11-08 at 9.27.33 AM.png)
Add another box, we will call this box S2.
CTL
![Screen Shot 2021-11-08 at 9.30.08 AM.png](/proxy/?url=https://content.instructables.com/F5B/1OGE/KVWE5AQ4/F5B1OGEKVWE5AQ4.png&filename=Screen Shot 2021-11-08 at 9.30.08 AM.png)
Change the length of S2 to 30 mm.
CTW
![Screen Shot 2021-11-08 at 9.30.24 AM.png](/proxy/?url=https://content.instructables.com/FPH/HQE5/KVWE5AQ5/FPHHQE5KVWE5AQ5.png&filename=Screen Shot 2021-11-08 at 9.30.24 AM.png)
Change the width of S2 to 30 mm.
CTH
![Screen Shot 2021-11-08 at 9.30.38 AM.png](/proxy/?url=https://content.instructables.com/FL5/R07Z/KVWE5AQ6/FL5R07ZKVWE5AQ6.png&filename=Screen Shot 2021-11-08 at 9.30.38 AM.png)
Change the height of S2 to 6 mm.
Raise S1
![Screen Shot 2021-11-08 at 9.30.58 AM.png](/proxy/?url=https://content.instructables.com/FOK/T9KE/KVWE5AQ7/FOKT9KEKVWE5AQ7.png&filename=Screen Shot 2021-11-08 at 9.30.58 AM.png)
Raise S1 to 6mm
Select the Shapes
![Screen Shot 2021-11-08 at 9.30.58 AM.png](/proxy/?url=https://content.instructables.com/FOK/T9KE/KVWE5AQ7/FOKT9KEKVWE5AQ7.png&filename=Screen Shot 2021-11-08 at 9.30.58 AM.png)
Select S1 and S2
Align
![Screen Shot 2021-11-08 at 9.32.00 AM.png](/proxy/?url=https://content.instructables.com/FSA/HRWR/KVWE5AQ8/FSAHRWRKVWE5AQ8.png&filename=Screen Shot 2021-11-08 at 9.32.00 AM.png)
Press the align button
Press the Button
![Screen Shot 2021-11-08 at 9.32.25 AM.png](/proxy/?url=https://content.instructables.com/FM1/VD8A/KVWE5AQ9/FM1VD8AKVWE5AQ9.png&filename=Screen Shot 2021-11-08 at 9.32.25 AM.png)
Press the middle button on the X axis
Press the Button
![Screen Shot 2021-11-08 at 9.32.39 AM.png](/proxy/?url=https://content.instructables.com/F5Y/TDI8/KVWE5AQA/F5YTDI8KVWE5AQA.png&filename=Screen Shot 2021-11-08 at 9.32.39 AM.png)
Press the middle button on the Y axis.
Group
![Screen Shot 2021-11-08 at 9.32.51 AM.png](/proxy/?url=https://content.instructables.com/FVL/BAM2/KVWE5AQB/FVLBAM2KVWE5AQB.png&filename=Screen Shot 2021-11-08 at 9.32.51 AM.png)
Group the shapes. This combined shape will be referred to as S1.1.2
Add Shape
![Screen Shot 2021-11-08 at 9.27.33 AM.png](/proxy/?url=https://content.instructables.com/FQL/13AL/KVWE5APY/FQL13ALKVWE5APY.png&filename=Screen Shot 2021-11-08 at 9.27.33 AM.png)
Add a box, this shape will be called S3
Make a Copy
![Screen Shot 2021-11-08 at 9.34.43 AM.png](/proxy/?url=https://content.instructables.com/FZC/NNS5/KVWE5AQD/FZCNNS5KVWE5AQD.png&filename=Screen Shot 2021-11-08 at 9.34.43 AM.png)
Make a copy of S1.1.2 which will be called S1.2.2
Move Shapes
![Screen Shot 2021-11-08 at 9.35.24 AM.png](/proxy/?url=https://content.instructables.com/FMN/GXDG/KVWE5AQE/FMNGXDGKVWE5AQE.png&filename=Screen Shot 2021-11-08 at 9.35.24 AM.png)
Move S1.1.2 and S1.2.2 out of the way
CTW
![Screen Shot 2021-11-08 at 9.36.10 AM.png](/proxy/?url=https://content.instructables.com/FBO/H4WF/KVWE5AQF/FBOH4WFKVWE5AQF.png&filename=Screen Shot 2021-11-08 at 9.36.10 AM.png)
Change the width of S3 to 42 mm.
CTL
![Screen Shot 2021-11-08 at 9.36.43 AM.png](/proxy/?url=https://content.instructables.com/FOW/TPJA/KVWE5AQG/FOWTPJAKVWE5AQG.png&filename=Screen Shot 2021-11-08 at 9.36.43 AM.png)
Change the length of S3 to 42 mm.
CTH
![Screen Shot 2021-11-17 at 8.45.20 AM.png](/proxy/?url=https://content.instructables.com/F46/SARP/KW3JCZE2/F46SARPKW3JCZE2.png&filename=Screen Shot 2021-11-17 at 8.45.20 AM.png)
Change the height of S3 to 24 mm.
Change S1.2.2
![Screen Shot 2021-11-08 at 9.37.38 AM.png](/proxy/?url=https://content.instructables.com/FVG/GHCH/KVWE5AQH/FVGGHCHKVWE5AQH.png&filename=Screen Shot 2021-11-08 at 9.37.38 AM.png)
Change S1.2.2 into a hole
Raise S1.2.2
![Screen Shot 2021-11-10 at 8.23.58 AM.png](/proxy/?url=https://content.instructables.com/FBF/D4LF/KVWE5AQI/FBFD4LFKVWE5AQI.png&filename=Screen Shot 2021-11-10 at 8.23.58 AM.png)
Raise S1.2.2 to 12 mm.
Select
![Screen Shot 2021-11-10 at 8.24.57 AM.png](/proxy/?url=https://content.instructables.com/FG3/4Z2H/KVWE5AQK/FG34Z2HKVWE5AQK.png&filename=Screen Shot 2021-11-10 at 8.24.57 AM.png)
Select S3 and S1.2.2
Press Align
![Screen Shot 2021-11-10 at 8.25.22 AM.png](/proxy/?url=https://content.instructables.com/F3O/MDIR/KVWE5AQL/F3OMDIRKVWE5AQL.png&filename=Screen Shot 2021-11-10 at 8.25.22 AM.png)
Press the align button.
Press Button
![Screen Shot 2021-11-10 at 8.26.28 AM.png](/proxy/?url=https://content.instructables.com/F7U/76GS/KVWE5AQM/F7U76GSKVWE5AQM.png&filename=Screen Shot 2021-11-10 at 8.26.28 AM.png)
Press the middle button on the x axis
Press Button
![Screen Shot 2021-11-10 at 8.26.28 AM.png](/proxy/?url=https://content.instructables.com/F7U/76GS/KVWE5AQM/F7U76GSKVWE5AQM.png&filename=Screen Shot 2021-11-10 at 8.26.28 AM.png)
Press the middle button on the Y axis
Group
![Screen Shot 2021-11-10 at 8.26.41 AM.png](/proxy/?url=https://content.instructables.com/FA8/VDVO/KVWE5AQN/FA8VDVOKVWE5AQN.png&filename=Screen Shot 2021-11-10 at 8.26.41 AM.png)
Group the selected shapes, this will now be called S1.2.3.
Grab a Tube
![Screen Shot 2021-11-10 at 8.27.09 AM.png](/proxy/?url=https://content.instructables.com/F5Q/QILG/KVWE5AQO/F5QQILGKVWE5AQO.png&filename=Screen Shot 2021-11-10 at 8.27.09 AM.png)
Bring a tube to the plane. This will be called S4
Turn S4
![Screen Shot 2021-11-10 at 8.27.21 AM.png](/proxy/?url=https://content.instructables.com/F82/5IPI/KVWE5AQP/F825IPIKVWE5AQP.png&filename=Screen Shot 2021-11-10 at 8.27.21 AM.png)
Turn S4 90 degrees sideways
Raise S4
![Screen Shot 2021-11-10 at 8.28.45 AM.png](/proxy/?url=https://content.instructables.com/FD4/SL6B/KVWE5AQS/FD4SL6BKVWE5AQS.png&filename=Screen Shot 2021-11-10 at 8.28.45 AM.png)
Raise S4 to 10 mm
Select the Shapes
![Screen Shot 2021-11-10 at 8.29.01 AM.png](/proxy/?url=https://content.instructables.com/F9H/DCT9/KVWE5AQT/F9HDCT9KVWE5AQT.png&filename=Screen Shot 2021-11-10 at 8.29.01 AM.png)
Select S1.1.2 and S4
Align
![Screen Shot 2021-11-10 at 8.29.17 AM.png](/proxy/?url=https://content.instructables.com/FHW/ZCN1/KVWE5AQU/FHWZCN1KVWE5AQU.png&filename=Screen Shot 2021-11-10 at 8.29.17 AM.png)
Press Align
Align
![Screen Shot 2021-11-10 at 8.29.24 AM.png](/proxy/?url=https://content.instructables.com/FKI/53V8/KVWE5AQV/FKI53V8KVWE5AQV.png&filename=Screen Shot 2021-11-10 at 8.29.24 AM.png)
Press the middle button on the X axis.
Press Button
![Screen Shot 2021-11-10 at 8.29.47 AM.png](/proxy/?url=https://content.instructables.com/FQM/XKSC/KVWE5AQW/FQMXKSCKVWE5AQW.png&filename=Screen Shot 2021-11-10 at 8.29.47 AM.png)
Press the middle button on the Y axis.
Group
![Screen Shot 2021-11-10 at 8.30.03 AM.png](/proxy/?url=https://content.instructables.com/FYI/43X4/KVWE5AQX/FYI43X4KVWE5AQX.png&filename=Screen Shot 2021-11-10 at 8.30.03 AM.png)
group the selected shapes.
Your Done
![Screen Shot 2021-11-15 at 9.21.48 AM.png](/proxy/?url=https://content.instructables.com/FI9/QFZC/KW0OIBBF/FI9QFZCKW0OIBBF.png&filename=Screen Shot 2021-11-15 at 9.21.48 AM.png)
Congrates, Your done